فروش SU-105IP دما سنج

▶Turn the power on while pressing set key. And keep pressing the set key.
▶Release the key when the you see StH in the display unit.
▶Select tyP by pressing set key several times.
▶Set the configuration as following using Up and Dn keys
Item Setting Description Factory
setting tyP t Use the auxiliary relay as the timer output
▶Press set key for longer than 5 seconds to save the configuration.
② How to set timer
▶Press set key for longer than 5 seconds when the display shows a current
temperature. Release the key when you see diF.
▶Press set key several times to select On. If ON does not appear, the auxiliary output is
not selected as the timer output. See 1) How to set the auxiliary relay to the timer
output
▶Set the configuration as following using Up and Dn keys
Item Setting Description
on 5 The output will be ON for 5 minutes after a OFF period of
15 minutes
User
setting
oFF 15 The output will be OFF for 15 minutes after a ON period of
5 minutes.
▶Press set key for longer than 5 seconds to save the configuration.
③Description of the pulse cycle
Note: Periodic timer is operated separatory operat Note: Periodic timer is operated separatory operated from temperature controller tory operated from temperature controller ed from temperature controller
▶Install the unit in an environment where
1) the temperature is relatively constant,
2) there is no corrosive gas,
3) the humidity is normal, and
4) there is no excessive dust and electric noise.
▶Wire (or line) connections
Sensor line is sensitive to noise from high-voltage power line. Use a separate pipe.
▶For applications where bodily injury or property damage can occur, you connect
the product using a double safety device.
13.How to set Alarm Output (Auxiliary output) 13.How to set Alarm Output (Auxiliary output) How to set Alarm Output (Auxiliary output)
14.Timer setting 14.Timer setting Timer setting
15min. Off 5min. On 15min. Off 5min. On
Pulse cycle
output while
on=5min,
oFF=15min
12.Prevention of re-configuration and configuration lock
15. Installation
•Temperature & Humidity Controller
•Samwon Temperature Controller
•SU-105IP Temperature Controller
•Home
•Temperature & Humidity Controller
•SU-105IP Temperature Controller
SU-105IP Temperature Controller
Model SU-105IC


•Temperature & Humidity Controller
•SU-503B Humidity Controller
•Home
•Temperature & Humidity Controller
•Samwon humidity controller
•SU-503B Humidity Controller
SU-503B Humidity Controller
Model SU-503B

SPECIFICATIONS
Model
SU-105IP
Temperature Range -200~400
Outer Size 76mm(width) x 34(height) x 70(depth)
Pannel Size 70mm(width) x 28(depth)
Sensor IC(with Sensor)
Sensor Accuracy 0.5%
Output 1 ▶RELAY Output
(AC250/2A. DC12V)
-Cooling(C), Heating (H) Combination
Control
-Hysteresys 0~20
-Delay timer 0~240 sec.
▶SSR OutPut - DC12V
Output 2 ▶RELAY Output
(AC250/2A. DC12V)
-Alarm Sub Output
-Timer Sub Output (0~999 min.)

▶SSR Output - DC12V
Voltage AC220V(50/60Hz)±10%
(AC110V ,DC12V Option)
Power Abt. 5VA or less
Display Accuracy 0. 1±1digit
Relay Life Time In execess of 300,000(St. Load)
on/off (diF) 0.1~20.0 (diF)
Setting Method Digital Method with Up or Down Key
Operating Temp. 0~50°C
Operating Humidity 85% or less
Etc. -Sensor Input Compensation(rst)
-Delay timer(dlt)
Normal/Reverse Selection
-Locking Function for User
-Setting Range Limmited and
Setting Value is Locked by Operator
جهت خرید محصول با ما تماس بگیرید:
دفتر فروش تهران: بازرگانی تیکوا نیرو – آقای مقدم
تلفن های تماس:
33999115 – 33999719 -33113566